Zhermack Elite P&P Putty And Light Body Cartridge kit

Zhermack Elite P&P Putty And Light Body Cartridge kit

A Zhermack quality guarantee, for over 35 years.

Elite P&P silicones come in three different viscosities (putty, regular and light) offering normal or fast setting times to satisfy different clinical needs and use preferences.

INDICATIONS

• Primary impression
• Wash impression

ADVANTAGES

• High accuracy in the reproduction of details
• High tear resistance
• Excellent recovery from deformation
• High dimensional stability
• 3-year shelf life

• Viscosity: Putty and light body
• Mixing ratio: 1:1
• Technique recommended: single step impression & double step impression
• Type of setting: Normal set
• Working time: 2 minutes
• Time in mouth: 3:30 minutes
• Setting time: 5:30 minutes

Elite P&P Putty Soft

• 1 x 250ml Base
• 1 x 250ml Catalyst

Elite P&P Light Body cartridges

• 2 x 50ml Cartridge

Elite P&P Putty Soft + Light Body Cartridges

• 1 x 250ml Base
• 1 x 250ml Catalyst
• 2 x 50ml Cartridge

• All standard and/or special trays can be used, provided they are rigid and non-deformable.
• The adhesion of the impression material to the impression tray is a crucial phase in which errors must be avoided, above all when removing from the mouth.

Elite P&P Putty – Do not handle with latex gloves, carefully wash the hands before handling. Take equal amounts of the two components from the tins, only using the respective dosing spoons. Use the spoons that are the same color as the tin. Do not swap. Mix equal proportions of Elite P&P Putty Soft Base and Catalyst, until creating a mass of uniform colour, without streaks (mixing time: around 30 sec.).

• Elite P&P Light – Set up the dispensing gun and cartridge. Before fitting the mixing tip, check that the two components (base and catalyst) are released uniformly, by pressing lightly on the dispenser lever and squeezing out a small amount of material, which must be removed. Then fit the mixing tip on the cartridge and the intraoral tip, if used. After use, leave the tip on, as this will act as a cap until subsequent use.