Angelus Exacto Trial Pack

Angelus Exacto Trial Pack

Angelus Exacto Trial Pack contains glass fiber intraradicular conical posts designed with high light transmission and a double taper to closely match root canal anatomy. The longitudinal arrangement of fibers within a resin matrix ensures excellent resistance to fracture under normal physiological conditions.

These translucent posts are developed to enhance the aesthetic outcome of restorations. While they transmit light, they are not intended to ensure complete curing of resin cements in deeper canal regions. Their translucency primarily supports superior aesthetic integration in restorative procedures.

Indication

• Support of restorations and prosthetic crowns

Key Features

• Greater radiopacity for radiographic visualization
• Standardized burs with inactive tips for precise post calibration
• Ensures a very thin and uniform cement layer
• High fiber concentration for improved mechanical properties
• Special glass fiber for excellent light transmission
• Double taper design to match root canal shape
• Elastic modulus similar to dentin to reduce root fracture risk
• Silicone stop identifies post size and cutting point
• Prefabricated for direct use, saving clinical time
• Longitudinal fibers allow easier removal if required
• Versatile sizes suitable for most clinical cases

Composition

• Glass fiber – 80%
• Epoxy resin – 20%

Technical Specifications

• Color: Translucent
• Modulus of Elasticity: 30–40 GPa
• Flexural Strength: 1000–1430 MPa

Packaging

• 5 × Posts
• 1 × Drill

Directions for Use

• Root Canal Preparation: Select the post using a template and X-ray. Remove filling material while maintaining 3–5 mm apical seal. Prepare the canal with the corresponding drill size and verify radiographically.
• Post Preparation: Check fit, adjust silicone stop, and cut only with a diamond bur under water cooling. Clean with alcohol, dry, apply silane, and allow to dry for 1 minute. Apply adhesive catalyst as instructed.
• Cementation: Clean and dry canal, etch with 37% phosphoric acid, apply primer and catalyst, insert resin cement, place post, remove excess, and allow polymerization. Light cure if using dual-cure cement.
• Core Build-Up: Build the core using composite resin or a prefabricated glass fiber core system.