Shofu Beauticem SA Resin Cement

Shofu Beauticem SA Resin Cement

Beauticem SA is a self-etching, self-adhesive, dual-cure resin cement designed to deliver simple, fast, and reliable adhesion to a wide range of substrates including metals, indirect resins, and ceramics. Its advanced formulation ensures strong bonding performance with virtually no post-operative sensitivity, providing excellent comfort for patients.

Beauticem SA offers high translucency for aesthetic restorations, optimal handling characteristics, and durable long-term performance, making it suitable for both routine and demanding cementation procedures.

Designed For Cementation Of

• All-ceramic restorations
• Prostheses fabricated with precious, semi-precious, and non-precious alloys including titanium
• Porcelain-fused-to-metal restorations
• Indirect resin restorations
• All-ceramic, resin, and metal restorations to implant abutments
• Metal and resin post & core restorations

Indications

• Fabrication and repair of resin-veneered restorations
• Repair of porcelain-fused-to-metal restorations
• Fabrication and repair of chrome cobalt dentures or metal attachments
• Bonding and repair of metal restorations such as inlays, onlays, crowns, bridges, metal splints, posts, and cores using dental adhesive resin or bonding materials

Features

• Durable bond to a wide range of substrates
• High level of translucency for demanding aesthetic cases
• Maximum resin polymerization for superior mechanical properties
• High resistance to staining and low solubility
• Optimal viscosity for easy handling
• Extremely thin bonding layer (approximately 11.8 μm) for invisible margins
• Virtually no post-operative sensitivity
• Effective fluoride release with sustained anti-cariogenic and anti-bacterial properties
• Self-etching, self-adhesive resin cement
• No primer required for most substrates (except porcelain)
• Dual-cure system for reliable curing and easy clean-up
• High radiopacity
• Low film thickness (approximately 12 μm)

Key Specifications

Composition

• Acetone
• Phosphonic acid monomer
• Thioctic acid monomer

Directions for Use

• Pretreatment – Extraoral use: Sandblast the adhesive metal surface with 50–100 μm aluminum oxide at approximately 0.3–0.5 MPa (3–5 bar). Perform ultrasonic cleaning and dry with clean air. Alternatively, roughen the surface with a suitable abrasive such as a diamond bur.
• Pretreatment – Intraoral use: Place a rubber dam and avoid contact with oral tissues. Roughen the adhesive metal surface using a dental abrasive, rinse with water, and dry with clean air.
• Application: Dispense an adequate amount of M.L. Primer onto a dish. Apply a single layer to the adhesive surface using a disposable brush. Leave undisturbed for 10 seconds and allow to dry naturally.
• Bonding: Bond the resin material according to the instructions for use of the selected product.

Packaging

• 1 × 9 ml Beauticem SA Paste (Hand-Mix Type)
• 1 × Mixing Pad and Spatula